contact us RFID
Neptuneseal
Anti Tamper

RFID GATE FOR CONTAINERS & RFID SECURITY SEALS
RFID System for automatic
reading of security seals at a multi-lane gate


contact us
NEPTUNESEAL STANDARD NEPTUNESEAL BARCODE NEPTUNESEAL DATAMATRIX

RFID NEPTUNESEAL READERS BIODEGRADABILITY

PRODUCED ENTIRELY IN ITALY

UHF PASSIVE RFID GATE SYSTEM is an «all-in-one» UHF RFID  - ISO 18000-6 (EPC Global)  system designed specifically to monitor and manage the movement of containers that pass through gates.

UHF PASSIVE RFID GATE SYSTEM monitors in a reliable and secure way the RFID Seals applied to containers, identifying the individual lanes.

 
INSTANTLY COMPATABLE WITH
ALL SYSTEMS WORLD WIDE
 

Every UHF PASSIVE RFID GATE SYSTEM is made up of a reader and two antennas that are capable of reading the RFID seals regardless of their position or the conditions:

  1. RFID seals applied on the upper handles of the container
  2. RFID seals applied on the lower handles at the foot of the container
  3. RFID seals applied on the left or right hand side of the container
  4. RFID seals applied to containers positioned with the doors towards the lorry’s cab
  5. RFID seals applied with the doors facing the opposite end of the lorry’s cab


UHF PASSIVE RFID GATE SYSTEM
Main Features

  1. Advanced Detection Algorithm , for the accurate and efficient reading of the seals that pass through the gate
  2. Lane Detection Firmware, for identifying and reading of seals in adjacent lanes
  3. Auto setting capability, for improving the readings regardless of the environmental conditions
  4. Fast Mounting, for easy servicing, set sup and installation
  5. Fault Tolerance Management System , for 24 hour continuity and service operations (optional)

 

Quick and Easy Set -Up

UHF PASSIVE RFID GATE SYSTEM  is able to support special configurations such as reading two RFID seals applied on two containers traveling on the same trailer.

(in this situation the two containers should be positioned with the two doors opposite each other with a distance between them of at least 1mt.)

 

 

UHF PASSIVE RFID GATE SYSTEM is an RFID UHF  - ISO 18000-6 (EPC Global)
Is able  to read all RFID seals (by any manufacturer ) that meet the above ISO standard and suitable for being read by a gate system.

Every UHF PASSIVE RFID GATE SYSTEM lane can read a maximum of 2 RFID seals feach time (for  reading 4 RFID seals an optional special firmware is required)

The system also requires EPR FAST LANE STATION.

The average reading distances are:  6m / 8m

Optional Kits:

  • Kit TEMP: kit designed for operating at temperatures of - 40 ° C a + 75 ° C
  • Kit LED Alert: for a local alerts using high intensity LED and strong buzzer

 



Main hardware Characteristics
“UHF PASSIVE RFID GATE SYSTEM”


Operating Frequency:
865-869 MHz, ETSI EN 302-208
Operating Protocol: ISO 18000-6C; EPC Class1 Gen2;
Antenne: Special embededed antenna system
RF Power: Programmable via software up to +32.5 dBm (up to +30dBm if used with POE)
Reader power: POE IEEE802.3 or 24 Vdc, 0,8A via an external power source
Network power: 100-240 Vac, 50/60Hz
Communication ports: Ethernet 10/100 Base-T Ethernet (RJ45); RS232, USB2.0
Sensors / External photocells for trigger signal
Configuration address DHCP, Static, LLA + mDNS
Environmental conditions:

  1. Operating Temperature: -20°C + 50°C
  2. Stock Temperature: –20 °C +60 °C

Basic Dimensions: 300 x300x100 mm
Weight: 3000 g
Certification: CE (FCC can also be supplied on request)
Housing: Metal and ABS
Waterpoofing: IP65

 

RFID SEAL ANTENNA & READER
   
   
Management software per
UHF PASSIVE RFID  GATE SYSTEM”

 

 

The  Management Software allows the RFID gates to be monitored and operated easily by the control staff. The main pieces of data that the system can manage are:

  • serial number of the RFID container seals
  • identification of the gate
  • identification of the lane
  • date and time of the reading
  • number and reading of each individual RFID container seal
  • take a sequential reading where a container is sealed with two seals or where there are two containers on the same trailer
  • the state of the security seal (e.g. TAMPERED / NOT TAMPERED) valid for the containers fitted with the RFID NEPTUNE SEAL Anti tamper with special software
  • (optional) generation of log file

The Management Software for  UHF PASSIVE RFID GATE SYSTEM” can be installed on any  PC or SERVER that uses WINDOWS.

To connect the PC with the Management Software and  the  “UHF PASSIVE RFID GATE SYSTEM” modules a LAN network Ethernet TCP/IP connection is required.

The “UHF PASSIVE RFID GATE SYSTEM” system can also be ingrated with existing IT systems and structure.

“UHF PASSIVE RFID GATE SYSTEM” is compatible with the following Leghorn RFID seals:

  • NEPTUNE SEAL RFID Standard
  • NEPTUNE SEAL RFID Anti-tamper
  • TITAN Seal RFID
  • FORK SEAL RFID
  • CABLE LOCK SEAL RFID

 




 

username:
password:

- Register

CERTIFICATES:
VIDEO:

 
OUR OTHER ISO 17712 APPROVED SEALS

CABLESEAL 3,5

FORKSEAL C
 
OUR OTHER ISO 17712:2010 APPROVED SEALS

NEW FORKSEAL®
 

the complete legal text can
be purchased directly from